Pontiac Roof Rack Installation And Review Videos

Rhino Rack Roof Rack Review - 2009 Pontiac G6- Video

Speaker 1: Today on our 2009 Pontiac G6 we're going to be installing Rhino-Rack's Roof Rack System. We're using the Vortex Aero Crossbars, Part Number RRVA126S-2. These also come in black, Part Number RRVA126B-2, Rhino-Rack 2500 Series Legs, Part Number RRRLKVA, and the Pontiac Custom Fit Kit, Part Number DK067.This roof rack system from Rhino-Rack, along with the custom fit kit, will allow you get it right on top of your vehicle without any factory crossbars or roof rails. It'll work with accessories such as bike racks, cargo carriers, cargo baskets, and many of your other favorite accessories.These are 49" long bars with an elliptical aerodynamic design. Each end cap has a locking mechanism to help deter theft, and when you remove the end cap you can access the T-slot, so all of your T-slot accessories should work fine. While the end cap is in place there's no way for it to be removed. more

9/6/2018 11:27:12 AM

Thule Crossroad Roof Rack Installation - 2005 Pontiac Vibe- Video

Today on our 2005 Pontiac Vibe, well be test fitting the Thule Square Load Bar System using the 50 inch bars with part number THLB50 and the Thule Crossroad Roof Mounted Roof Railing Foot Pack, part number TH450. With our roof rack assembled according to the instructions, well begin our test fit by placing the front bar onto the front part of our roof. Well go ahead and set the bar, so our foot packs are in place around our side rails. Since we dont have very much side rail to work with, well go ahead and scoot our foot packs all the way up to the front. Well find a fixed point on the side rails to align our feet and then we can check for even bar overhang on each side of our vehicle. Well take the strap, bring it around the bar back into the foot pack and use the included tool to tighten it in place. more

8/19/2013 3:42:32 PM

Thule Traverse Roof Rack Installation - 2009 Pontiac Vibe- Video

Today we will be working on this 2009 Pontiac Vibe, and we will be test fitting a Thule Roof Rack System. We will be using the 50 load bars and the Traverse Foot kit. We already have our load bar assemblies put together, and now were ready to mount them on the vehicle. First we need to open the drivers and the passengers side front doors. Now we are ready to place our load bar assembly up on top of the roof. To position the front assembly we will measure 15 from the front of the windshield seal to the leading edge of the Traverse feet on both sides of the vehicle. more

11/8/2011 3:23:26 PM